+ Reply to Thread
Results 1 to 4 of 4

Thread: OBD II

  1. #1
    Registered Member
    Location
    Cape Girardeau, MO, United States
    Member No: 24497 mytoys is an unknown quantity at this point mytoys's Avatar
    Join Date
    Jan 2002
    Posts
    348
    Rep Power
    0


    Yes | No

    OBD II

    Hi ya'll,
    I went up to St. Louis today and got a OBDII adapter/program, from a company named "Car Code", for my E38. I hooked it up and it showed some codes that don't show up on my chart. The owner, a guy named Alex Peper, said he up-loaded all the codes he had for the BMW but these two (out of the four I had) he didn't know of. Maybe some of ya'll know what they mean. 1st one is "P1175" and the other is "P1174". Do these numbers mean anything to any of you? After I got the codes I cleared them and the 'check engine' light was out.
    I also have a "PEAKE" code/reset tool but It can't read or clear these (what I call 'hard') codes. I have both of the parts CD's, the repair/parts sheets, and the code/reset tool, for my 1997 740i; do I now need to find a 'real' BMW code number/fault name?
    Any help would be greatly apprecated.
    Thanks
    Patrick and Blueboy
    Patrick and Patty Ford
    and BlueBoy ie. 1997 740I


  2. #2
    Deek
    Guest
    Location
    , ,
    Member No: Deek's Avatar


    Yes | No

    Re: OBD II

    Found this for P1174=
    SAE Code P1174
    DTC Code 17582
    Description Fuel Trim, Bank 1 Different injection times

    Nothing found for P1175.
    With the description of 1174 maybe someone will know where to start lookig to fix the problem.

  3. #3
    Registered Member
    Location
    Los Gatos, , United States
    Member No: 10141 jcarey is an unknown quantity at this point jcarey's Avatar
    Join Date
    May 2001
    Posts
    1,680
    Rep Power
    0


    Yes | No

    Fuel trim adaption malfunction Bank 1 and 2

    Here are the P Codes I have that I found it in....
    ECU:M5.2, Engine: M62, from 01.12.95 till 30.04.96
    PCode BMW-FC PCode text
    P0100 115 Mass or Volume Air Flow Circuit
    P0111 124 Intake Air Temperature Sensor 1 Circuit Range/Performance
    P0116 123 Engine Coolant Temperature Circuit Range/Performance
    P0120 117 Throttle/Pedal Position Sensor/Switch \'A\' Circuit
    P0130 10 O2 Sensor Circuit (Bank 1 Sensor 1)
    P0133 15 O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
    P0135 13 O2 Sensor Heater Circuit (Bank 1 Sensor 1)
    P0136 12 O2 Sensor Circuit (Bank 1 Sensor 2)
    P0139 17 O2 Sensor Circuit Slow Response (Bank 1 Sensor 2)
    P0150 18 O2 Sensor Circuit (Bank 2 Sensor 1)
    P0153 21 O2 Sensor Circuit Slow Response (Bank 2 Sensor 1)
    P0155 5 O2 Sensor Heater Circuit (Bank 2 Sensor 1)
    P0156 20 O2 Sensor Circuit (Bank 2 Sensor 2)
    P0159 23 O2 Sensor Circuit Slow Response (Bank 2 Sensor 2)
    P0170 26 Fuel Trim (Bank 1)
    P0173 34 Fuel Trim (Bank 2)
    P0201 150 Injector Circuit/Open - Cylinder 1
    P0202 151 Injector Circuit/Open - Cylinder 2
    P0203 152 Injector Circuit/Open - Cylinder 3
    P0204 153 Injector Circuit/Open - Cylinder 4
    P0205 154 Injector Circuit/Open - Cylinder 5
    P0206 155 Injector Circuit/Open - Cylinder 6
    P0207 156 Injector Circuit/Open - Cylinder 7
    P0208 157 Injector Circuit/Open - Cylinder 8
    P0300 62 Random/Multiple Cylinder Misfire Detected
    P0300 75 Random/Multiple Cylinder Misfire Detected
    P0301 50 Cylinder 1 Misfire Detected
    P0301 63 Cylinder 1 Misfire Detected
    P0302 51 Cylinder 2 Misfire Detected
    P0302 64 Cylinder 2 Misfire Detected
    P0303 52 Cylinder 3 Misfire Detected
    P0303 65 Cylinder 3 Misfire Detected
    P0304 53 Cylinder 4 Misfire Detected
    P0304 66 Cylinder 4 Misfire Detected
    P0305 54 Cylinder 5 Misfire Detected
    P0305 67 Cylinder 5 Misfire Detected
    P0306 55 Cylinder 6 Misfire Detected
    P0306 68 Cylinder 6 Misfire Detected
    P0307 56 Cylinder 7 Misfire Detected
    P0307 69 Cylinder 7 Misfire Detected
    P0308 57 Cylinder 8 Misfire Detected
    P0308 70 Cylinder 8 Misfire Detected
    P0325 210 Knock Sensor 1 Circuit (Bank 1 or Single Sensor)
    P0330 211 Knock Sensor 2 Circuit (Bank 2)
    P0335 111 Crankshaft Position Sensor \'A\' Circuit
    P0340 112 Camshaft Position Sensor \'A\' Circuit (Bank 1 or Single Sensor)
    P0420 40 Catalyst System Efficiency Below Threshold (Bank 1)
    P0430 45 Catalyst System Efficiency Below Threshold (Bank 2)
    P0440 93 Evaporative Emission System
    P0443 98 Evaporative Emission System Purge Control Valve Circuit
    P0500 120 Vehicle Speed Sensor \'A\'
    P0505 32 Idle Air Control System
    P0600 6 Serial Communication Link
    P0600 236 Serial Communication Link
    P0601 103 Internal Control Module Memory Check Sum Error
    P0603 102 Internal Control Module Keep Alive Memory (KAM) Error
    P0604 101 Internal Control Module Random Access Memory (RAM) Error
    P0604 104 Internal Control Module Random Access Memory (RAM) Error
    P1140 121 Mass or Volume Air Flow Circuit Range/Performance Problem
    P1166 130 Oxygen Sensors Swapped
    P1174 27 Fuel Trim Adaptation Malfunction (Bank 1)
    P1175 35 Fuel Trim Adaptation Additive Malfunction (Bank 2)
    P1186 14 O2 Sensor Heater Control Circuit (Bank 1 Sensor 2)
    P1187 4 O2 Sensor Heater Control Circuit (Bank 2 Sensor 2)
    P1384 212 Knock Sensor 3 Circuit
    P1385 213 Knock Sensor 4 Circuit
    P1386 220 Control Module Self-Test, Knock Control Circuit Baseline Test (Bank 1)
    P1509 168 Idle-Speed Control Valve Opening Solenoid Control Circuit Signal Electrical
    P1550 169 Idle-Speed Control Valve Closing Coil Electrical
    P1585 8 Misfire Detected with Low Fuel
    P1589 222 Control Module Self-Test, Knock Control Test Pulse (Bank 1)
    P1690 165 Malfunction Indicator Lamp (MIL) Control Circuit Electrical
    John
    Bettie is my Jet Black '98 740iL

  4. #4
    Registered Member
    Location
    , ,
    Member No: 62919 davisjbmw is an unknown quantity at this point davisjbmw's Avatar
    Join Date
    Jan 2003
    Posts
    23
    Rep Power
    0


    Yes | No

    Re: OBD II

    Hi,
    I have the br-2 interface which hooks up to my laptop.
    http://obddiagnostics.com/index.html
    codes I get from the program are:
    P1174 Cam Sensor Fault
    P1175 Cam Control Fault
    good luck jj

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum