+ Reply to Thread
Results 1 to 2 of 2

Hybrid View

  1. #1
    Registered Member
    , ,
    Member No: 99178 sridgeback69 is an unknown quantity at this point sridgeback69's Avatar
    Join Date
    Jan 2004
    Rep Power

    Yes | No

    plug problems

    i have installed a set of denso iridium iw24 plugs in my bmw 635 turbo('87 cartech turbo system).the problem is upon cold starting a plugs tend to gas foul ,sometimes they start to fire after a few min. or i have to remove and clean.i think i've gone with to cool of a plug.also i have a hot msd ign. spark.any thoughts on my problem would be appresiated. thanks kevin

  2. #2
    , ,
    Member No: rory's Avatar

    Yes | No

    Re: plug problems

    Are you in a cold climate? If not I would unplug the cold start injector. We have had that problem on BMWs but not on other cars, we also recommend using standard (not platnum or iridium) NGK or Denso(or a plug of your choice). It cost less and you have the choice of gaps.


+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum