+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 20 of 54
  1. #1
    RubbinzRacin
    Guest
    Location
    , ,
    Member No: RubbinzRacin's Avatar


    Yes | No

    GruppeM Intake VS. Dinan Intake

    Here's the deal - I'm scheduled to get the Dinan S2 package installed soon, including the intake, etc. My plan is to use the Eisenmann exhaust and to keep the rest Dinan. But I keep hearing about this GruppeM intake. Does anyone have any experience and/or facts about using the Eisenmann exhaust/GruppeM intake/Dinan S2? Any compatibility issues?

    My goal is to get the best performance without sacrificing warranty/serviceability. Any feedback would be much appreciated.

    TIA


  2. #2
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    If you are willing to spend the $ for the complete

    Dinan package then its definitly worth it IMO. If you lease your vehicle or dont plan on owning it for a long period of time then gruppem eisenmann is a great alternative. <hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  3. #3
    RubbinzRacin
    Guest
    Location
    , ,
    Member No: RubbinzRacin's Avatar


    Yes | No

    Can you elaborate?

    Why do you say that?

    Any idea what the HP/Torque gains are? Differences, etc?

    Thanks,
    CM

  4. #4
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    HP gain from intake is supposed to be 14+

    plus exhaust = possibly 25 total? not sure exactly but its a noticeable difference (both sound and performance). The gruppem/eisenmann race combo roars at high speeds and is as quiet as a mouse at idle. If you are concerned with warranty and dont mind spending an extra g or so i would go with the dinan. They are both great products and you wont make a mistake either way. Remember i didnt want to add software and wanted to be able to simply unbolt after my lease.<hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  5. #5
    RubbinzRacin
    Guest
    Location
    , ,
    Member No: RubbinzRacin's Avatar


    Yes | No

    Gotcha, thanks for the info!


  6. #6
    Registered Member
    Location
    , ,
    Member No: 22801 jhso is an unknown quantity at this point jhso's Avatar
    Join Date
    Jan 2002
    Posts
    10,626
    Rep Power
    0


    Yes | No

    LOL @ 25hp... hahahahahhaa

    your butt dyno is broken...-----------
    <img src="http://members.roadfly.com/jhso/sig.jpg">
    X5 FAQ ----- <a href="http://www.*******.net">http://www.*******.net</a> -----



  7. #7
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    if u want to do dinan call concord motorsports

    in new hampshire. They do excellent work and have competitive install rates. Good Luck!<hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  8. #8
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    Thats the total horse in your 3.0 HAHAHAHAAAAAAAAA

    <hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  9. #9
    RubbinzRacin
    Guest
    Location
    , ,
    Member No: RubbinzRacin's Avatar


    Yes | No

    Got an appointment at

    BMW Gallery in Norwood. They're closer and seem good. Any feedback on them?

    Thanks again!

  10. #10
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    ask janix [email protected]

    <hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  11. #11
    RubbinzRacin
    Guest
    Location
    , ,
    Member No: RubbinzRacin's Avatar


    Yes | No

    Yeah right...

    I haven't even met Jan in person yet and he's already sent the mod bugs swarming on me! I'm almost afraid to ask him questions because I might find out something else I want to change... ;)

  12. #12
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    ROFL so true

    <hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  13. #13
    Registered Member
    Location
    , NH, United States
    Member No: 55827 jmh is an unknown quantity at this point jmh's Avatar
    Join Date
    Oct 2002
    Posts
    386
    Rep Power
    0


    Yes | No

    Re: ask janix [email protected]


    Well as long as you don't have any aftermarket stereo/wheels on your car you should be safe :) ... For my part I don't think I'll get near them within a hundred miles (although the service manager (Charly) has been very good in handling the situation and tried to do the best he could)). Their work is not outstanding and has been lacking attention to detail but at last nothing fell off the car as I picked it up ... The story behind my Dinan S2 install can be found <a href="http://bimmer.roadfly.org/bmw/forums/e53/forum.php?postid=3102892&page=1">here ...</a>

    I personaly would give Concord Motorsport a try as they are a smaller shop (independent) and every time I visited them they've been very nice and seemed to know what they are talking about. You can contact Brian van Deinse at 603-226-BMWS or 888-477-2697 or speak to Dan (who is their Dinan rep). Labor is pretty reasonable as well at $65.00 per hour.

    - Jan

  14. #14
    Registered Member
    Location
    , ,
    Member No: 83407 sithjedi333 is an unknown quantity at this point sithjedi333's Avatar
    Join Date
    Aug 2003
    Posts
    450
    Rep Power
    0


    Yes | No

    LOL... he got u guud!!!


  15. #15
    Registered Member
    Location
    , ,
    Member No: 22801 jhso is an unknown quantity at this point jhso's Avatar
    Join Date
    Jan 2002
    Posts
    10,626
    Rep Power
    0


    Yes | No

    wanna race for pink slips??? oh wait... ur ****_is

    leased since you COULD NOT AFFORD TO BUY IT!!! NEXT... even my beater will smoke your_***... -----------
    <img src="http://members.roadfly.com/jhso/sig.jpg">
    X5 FAQ ----- <a href="http://www.*******.net">http://www.*******.net</a> -----



  16. #16
    Registered Member
    Location
    , ,
    Member No: 22801 jhso is an unknown quantity at this point jhso's Avatar
    Join Date
    Jan 2002
    Posts
    10,626
    Rep Power
    0


    Yes | No

    LOL... u need to go back to kindergarten&learn how

    2 spell, jr... -----------
    <img src="http://members.roadfly.com/jhso/sig.jpg">
    X5 FAQ ----- <a href="http://www.*******.net">http://www.*******.net</a> -----



  17. #17
    Registered Member
    Location
    , ,
    Member No: 83407 sithjedi333 is an unknown quantity at this point sithjedi333's Avatar
    Join Date
    Aug 2003
    Posts
    450
    Rep Power
    0


    Yes | No

    The only beater in your sig is the ....

    Does it make for a nice ride? Poor pup!!! LOL.

  18. #18
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    You running a livery service with the gay tint in

    the rear? as far as my lease goes i prefer to get a new vehicle every 2-3 years and yes i could buy you with a months earnings from real estate investment trust. See the link to my family's corporation below and shut your mouth chump.<hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  19. #19
    Registered Member
    Location
    Cambridge, MA, United States
    Member No: 64264 tesv12 is an unknown quantity at this point tesv12's Avatar
    Join Date
    Jan 2003
    Posts
    2,761
    Rep Power
    0


    Yes | No

    Confused, Moron??? Spelling Lessons???

    <hr>
    <img src="http://members.roadfly.org/tesv12/updated.jpg" border=0>

  20. #20
    Registered Member
    Location
    , ,
    Member No: 22801 jhso is an unknown quantity at this point jhso's Avatar
    Join Date
    Jan 2002
    Posts
    10,626
    Rep Power
    0


    Yes | No

    daddy!!! I need some money... LOL....

    look up the family that runs the Grand Eagle hotel in Hong Kong... you can't afford my toys and I don't see anybody in your family with an Enzo... so STFU lil chump... and come back when you can make your own money.... and REIT's... you only getting a lil chunk of that_****... like I said, you sure talk alot a lil 20 yr kid...-----------
    <img src="http://members.roadfly.com/jhso/sig.jpg">
    X5 FAQ ----- <a href="http://www.*******.net">http://www.*******.net</a> -----



+ Reply to Thread
Page 1 of 3 1 2 3 LastLast


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum