+ Reply to Thread
Results 1 to 11 of 11

Hybrid View

  1. #1
    Registered Member
    Location
    Spencer, MA, United States
    Member No: 12259 Boru635 is an unknown quantity at this point Boru635's Avatar
    Join Date
    Jul 2001
    Posts
    1,800
    Rep Power
    0


    Yes | No

    Dynoed the TCD prototype M20 kit in >>>

    '89 325 yesterday. We had a good ignition miss during the run (bad cap and rotor) and we think the timing needs work but it managed 260whp and 240wtrq with 12psi non-intercooled boost. The torque was killed by the miss and timing. Not bad for it's first time out. The intercooler is in the works along with "debugging" the few glitches.

    Sweeney

  2. #2
    Registered Member
    Location
    Vienna, VA, United States
    Member No: 8262 revhigh is an unknown quantity at this point revhigh's Avatar
    Join Date
    Mar 2001
    Posts
    10,664
    Rep Power
    0


    Yes | No

    Re: Dynoed the TCD prototype M20 kit in >>>

    I have some customers at my shop that would be interested in this setup. I have a shop in the Wash. DC area where we work on perf. mods along with service/maintenance specializing in BMW/Benz/Jaguar/Audi service.

    email me your info please.

    [email protected]


    E39 performance parts for sale

    "A witty saying proves nothing."



    Are you ready?
    last dyno sheet more to come N/A

  3. #3
    brandon
    Guest
    Location
    , ,
    Member No: brandon's Avatar


    Yes | No

    Re: Dynoed the TCD prototype M20 kit in >>>

    i have a 1988 bmw 325is and i am triing to come up with a turbo kit for iti have a few idea on what turbo i will be using but, i kinda need more info on boosting it. if you have any ideas on how to build a kit for it please let me know.

  4. #4
    Sweeney 635 Twin Turbo
    Guest
    Location
    , ,
    Member No: Sweeney 635 Twin Turbo's Avatar


    Yes | No

    We (TCD) are developing a kit to sell.


  5. #5
    SnakeEyes325is/iC
    Guest
    Location
    , ,
    Member No: SnakeEyes325is/iC's Avatar


    Yes | No

    Is there much lag?

    at what point does it no longer feel like thr Turbo is "bogging" it down? I would be interested in this kit, depending on price.....

    When do you guys think you'll have it done? It's probably a few years off before I would get it, I'm starting my suspension mods now......

  6. #6
    Sweeney 635 Twin Turbo
    Guest
    Location
    , ,
    Member No: Sweeney 635 Twin Turbo's Avatar


    Yes | No

    There is zero lag. Theres a constant swing of >>>

    the boost needle from vacuum, through atmospheric and up to maximum boost. You wouldn't know theres a turbo on it... feels more like a powerful NA engine. We hope to have kits available in a few months. We're setting up manufacturing subs now.

  7. #7
    SnakeEyes 325is/ic
    Guest
    Location
    , ,
    Member No: SnakeEyes 325is/ic's Avatar


    Yes | No

    Sounds good.


  8. #8
    ///ARINUTS...
    Guest
    Location
    , ,
    Member No: ///ARINUTS...'s Avatar


    Yes | No

    What did you guys do about fuel managment??

    FMU ?? Injectors?? remap of ECU EPROM?? BTM??


  9. #9
    Sweeney 635 Twin Turbo
    Guest
    Location
    , ,
    Member No: Sweeney 635 Twin Turbo's Avatar


    Yes | No

    FMU,injectors and BTM. We're still working >>>

    out the timing. Needs to be stock or advanced in the mid-range and a tad retarded up top... looking at different options to do this.

  10. #10
    SnakeEyes 325is/ic
    Guest
    Location
    , ,
    Member No: SnakeEyes 325is/ic's Avatar


    Yes | No

    you guys have a round, est for price of this?


  11. #11
    Registered Member
    Location
    Spencer, MA, United States
    Member No: 12259 Boru635 is an unknown quantity at this point Boru635's Avatar
    Join Date
    Jul 2001
    Posts
    1,800
    Rep Power
    0


    Yes | No

    $3875 non-intercooled. Check the "TCD"web page.



    Sweeney

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum