+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    , ,
    Member No: Sanjeev's Avatar

    Yes | No

    Question on MAF placement


    NE1 know the correct placement of the stock MAF meter on a SC'ed BMW:
    1) on the intake of the blower (non-pressurized air)
    - or -
    2) the intake of the motor (M70) (pressurized air)?

    The reason for the question is that in the current configuration, the MAF has been placed using configuration 2) above and we are seeing strong power upto around 4.2K - 4.5K RPM but then dramatically loose power. No fuel starvation at that RPM level (A/F Ratio is perfect!)

    Could it be that we need to place the MAF using config 1 or replace the stock MAF w/ a higher capacity (Euro M3) and reprogram using current configuration (1 above)?


  2. #2
    Registered Member
    Allentown, PA, United States
    Member No: 64084 fadams is an unknown quantity at this point fadams's Avatar
    Join Date
    Jan 2003
    Rep Power

    Yes | No

    Re: Question on MAF placement

    i have always seen them upsteam of the S/C

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum