+ Reply to Thread
Results 1 to 8 of 8
  1. #1
    gunter
    Guest
    Location
    , ,
    Member No: gunter's Avatar


    Yes | No

    how much HP can i get out of cold air induction?



  2. #2
    Hugo
    Guest
    Location
    , ,
    Member No: Hugo's Avatar


    Yes | No

    How long is a piece of string? More info needed...


  3. #3
    Sweeney
    Guest
    Location
    , ,
    Member No: Sweeney's Avatar


    Yes | No

    As long as the distance from one end to the other.

    :o)

  4. #4
    gunter
    Guest
    Location
    , ,
    Member No: gunter's Avatar


    Yes | No

    is longer or shorter piece of string better ? and.

    can you give me your suggestion on the best way to set up cold air intake, and how much HP can i get.
    thanks

  5. #5
    Sweeney 635 Twin Turbo
    Guest
    Location
    , ,
    Member No: Sweeney 635 Twin Turbo's Avatar


    Yes | No

    What do you drive?


  6. #6
    gunter
    Guest
    Location
    , ,
    Member No: gunter's Avatar


    Yes | No

    635


  7. #7
    Sweeney 635 Twin Turbo
    Guest
    Location
    , ,
    Member No: Sweeney 635 Twin Turbo's Avatar


    Yes | No

    Ahhhhhh, you're THAT Gunter.......

    ;o)
    Actually, the car is already setup with a cold air intake if you have the stock airbox. If you use a cone filter you can easily fabricate an enclosure around that corner of the engine bay using thin aluminum. You can even insulate the aluminum with duct insulation. This stuff can be found at Home Depot or the like.
    In reality, once the car is moving the intake temps aren't much above ambient. When I was playing with Saabs, a board member ran a test where he simultaniously measured the intake temp (in the pipe) and the outside air temp. While sitting, the intake temp rose pretty high (with an open cone filter) but dropped to a few degrees above ambient once underway.

  8. #8
    gunter
    Guest
    Location
    , ,
    Member No: gunter's Avatar


    Yes | No

    thanks for the info Sweeney, cheers


+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum