+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    MacLean in Seattle
    Guest
    Location
    , ,
    Member No: MacLean in Seattle's Avatar


    Yes | No

    I90 & WA DOT:1, My Hock R's:0

    Coming down I90 back from Leavenworth, WA, the freeway bent one of my rims. Any recommendations on a wheel repair shop in Seattle?

    TIA!


  2. #2
    RedmondRocket
    Guest
    Location
    , ,
    Member No: RedmondRocket's Avatar


    Yes | No

    There are two that I know of

    There is a place called Foster's Wheel in Ballard...90% say they do a great job...10% of the time the customer post they are unhappy...YMMV

    2nd place is Steve's custom cars in Bellevue ,,,don't know address but shop is located behind Car toys next to Park Place autos in Bellevue on 20th...they may only do cosmetics rather than straightening...

    I've also used www.WheelCollision.com ...they are in pennsylvania so they would require shipping but do fine work

  3. #3
    Registered Member
    Location
    Bellevue, , United States
    Member No: 8446 cargogal is an unknown quantity at this point cargogal's Avatar
    Join Date
    Mar 2001
    Posts
    29,353
    Rep Power
    0


    Yes | No

    Everyone that I\'ve talke to about Foster\'s says

    the same things - if you get Corey to do it, they can straighten a wheel, but not paint.



    If you can't go fast with 90hp, 900 won't do you any good.
    -bwob

  4. #4
    cece_77
    Guest
    Location
    , ,
    Member No: cece_77's Avatar


    Yes | No

    Re: Everyone that I've talke to about Foster's says

    Foster's is now under new management and now can paint as well as straighten rims.

  5. #5
    jmillet
    Guest
    Location
    , ,
    Member No: jmillet's Avatar


    Yes | No

    Alloy Wheel Repair Specialists

    There's a new guy on the block doing mobile wheel repair and painting. Call Brad Cecil at 206-755-9929 or email at [email protected]
    I haven't used Brad's services but have visited his mobile facility and was favorably impressed with his equipment and examples of work in progress.
    Usual disclaimers apply. YMMV

    Jim Millet
    2000 M Coupe

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum