+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    Registered Member
    Location
    Fort Lee, NJ, United States
    Member No: 57328 vladee is an unknown quantity at this point vladee's Avatar
    Join Date
    Nov 2002
    Posts
    319
    Rep Power
    0


    Yes | No

    How do I reset the service indicator?



  2. #2
    Registered Member
    Location
    , ,
    Member No: 137957 anovaso is an unknown quantity at this point anovaso's Avatar
    Join Date
    Mar 2006
    Posts
    2
    Rep Power
    0


    Yes | No

    Re: How do I reset the service indicator?

    Hello just wondering if ever got the that code for reseting the service light on my 99ML430. I changed the oil and now it wont turn off.
    Thanks!



  3. #3
    Henry Varges
    Guest
    Location
    , ,
    Member No: Henry Varges's Avatar


    Yes | No

    Re: How do I reset the service indicator?

    Do the following steps:

    Move start switch to position "2".

    Within the first 4 seconds after moving the start switch to position 2, press the reset button for the trip counter twice within one second. The display for the service request is activated for about 10 seconds.

    Within these 10 seconds, move the start switch into position "0". The service request continues to be displayed.

    Press the reset button for trip counter and keep it pressed.

    Move the start switch into position "2".

    Continue to hold the reset button for the trip counter pressed until the signal sounds and the new start distance appears in the display (it takes about 10 seconds).


  4. #4
    ozzy
    Guest
    Location
    , ,
    Member No: ozzy's Avatar


    Yes | No

    Re: How do I reset the service indicator?

    get a hammer and smash up your speed-o-meter, it wil be fine, or just burn the car

  5. #5
    shelley
    Guest
    Location
    , ,
    Member No: shelley's Avatar


    Yes | No

    Re: How do I reset the service indicator?


  6. #6
    Jose Martinez
    Guest
    Location
    , ,
    Member No: Jose Martinez's Avatar


    Yes | No

    Re: How do I reset the service indicator?

    IT WORKS!!!


    Thank you Henry!


    Author:
    Henry Varges on 2007-08-11 at 08:49:22 (posted from: Host: vc-196-207-32-37.3g.vodacom.co.za IP: 196.207.32.37)

    Subject:
    Re: How do I reset the service indicator? (469 views)
    Message: Do the following steps:

    Move start switch to position "2".

    Within the first 4 seconds after moving the start switch to position 2, press the reset button for the trip counter twice within one second. The display for the service request is activated for about 10 seconds.

    Within these 10 seconds, move the start switch into position "0". The service request continues to be displayed.

    Press the reset button for trip counter and keep it pressed.

    Move the start switch into position "2".

    Continue to hold the reset button for the trip counter pressed until the signal sounds and the new start distance appears in the display (it takes about 10 seconds).

  7. #7
    Jose Martinez
    Guest
    Location
    , ,
    Member No: 	 Jose Martinez's Avatar


    Yes | No

    Re: How do I reset the service indicator?

    Thank you very much for that it does work.
    My garage could not do it but 20 sec after reading your suggestion it was all sorted.
    Ta very much,
    Happy ML 270 owner.

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum