+ Reply to Thread
Results 1 to 18 of 18

Hybrid View

  1. #1
    Registered Member
    Location
    Sequim, WA, United States
    Member No: 115398 Borisfool is an unknown quantity at this point Borisfool's Avatar
    Join Date
    Oct 2004
    Posts
    109
    Rep Power
    0


    Yes | No

    top end r & r

    Recommendations for top end work on an 8 in the Seattle area?

    Thxs

  2. #2
    Registered Member
    Location
    Bellevue, WA,
    Member No: 74170 mattkins99 is an unknown quantity at this point mattkins99's Avatar
    Join Date
    May 2003
    Posts
    6,610
    Rep Power
    0


    Yes | No

    Car Tender in Seattle

    Eastside Bavarian in Issaquah
    Strictly BMW in Bellevue

    All great shops. Both Car Tender and Eastside Bavarian are very big with the BMW clubs.

    Matt Atkins
    Vice President
    Seattle5s
    98' 540i-6 blk/blk
    94' Pathfinder Green/gray


  3. #3
    Registered Member
    Location
    Sequim, WA, United States
    Member No: 115398 Borisfool is an unknown quantity at this point Borisfool's Avatar
    Join Date
    Oct 2004
    Posts
    109
    Rep Power
    0


    Yes | No

    Re: Car Tender in Seattle

    Matt thxs for reply -- no not body work, but top end engine work.

    Again, thxs for the info.

    Boris

  4. #4
    Registered Member
    Location
    Seattle, WA, United States
    Member No: 35891 mwong is an unknown quantity at this point mwong's Avatar
    Join Date
    May 2002
    Posts
    4,514
    Rep Power
    0


    Yes | No

    I agree with Matt

    I use Car Tender in Seattle
    1706 12th Ave
    www.Car-Tender.com
    206-324-0345

    I have also heard nothing but good things about Eastside Bavarian in Issaquah.
    1480 19th Ave NW
    Issaquah, WA 98027
    www.EastsideBavarian.com
    425-391-1990
    M.Wong
    E38 2000 740iL Orient Blue

    E39 2003 540i/6 Sterling Gray (European Delivery)

    E30 1987 325i Royal Blue (Passed on to a new family.)





  5. #5
    Boris
    Guest
    Location
    , ,
    Member No: Boris's Avatar


    Yes | No

    Thks for all your help, Happy New Year!


  6. #6
    Registered Member
    Location
    Bellevue, WA,
    Member No: 74170 mattkins99 is an unknown quantity at this point mattkins99's Avatar
    Join Date
    May 2003
    Posts
    6,610
    Rep Power
    0


    Yes | No

    Oh wait... what's r&r... do you mean bodyshops?

    Bel-Red Auto Rebuild in Bellevue and RnR right next door.

    Matt Atkins
    Vice President
    Seattle5s
    98' 540i-6 blk/blk
    94' Pathfinder Green/gray


  7. #7
    Velocewest
    Guest
    Location
    , ,
    Member No: Velocewest's Avatar


    Yes | No

    top end -- i.e. cylinder head


  8. #8
    Registered Member
    Location
    Mukilteo, WA, United States
    Member No: 97432 gkissell is an unknown quantity at this point gkissell's Avatar
    Join Date
    Dec 2003
    Posts
    444
    Rep Power
    0


    Yes | No

    Remove & Replace


    1991 750iL


  9. #9
    Jim Derrig 93 750
    Guest
    Location
    , ,
    Member No: Jim Derrig 93 750's Avatar


    Yes | No

    V8 or V12?


  10. #10
    Registered Member
    Location
    Sequim, WA, United States
    Member No: 115398 Borisfool is an unknown quantity at this point Borisfool's Avatar
    Join Date
    Oct 2004
    Posts
    109
    Rep Power
    0


    Yes | No

    V12


  11. #11
    Jim Derrig 93 750
    Guest
    Location
    , ,
    Member No: Jim Derrig 93 750's Avatar


    Yes | No

    Re: V12

    then the outlook is not good, but not hopeless. When the head bolts failed on my 750 4 years ago I looked high and low for a mech who could actually claim experience pulling the heads off a V12. Nobody could. The dealers were the worst because in addition to having zero experience, they had the wallet vacuum turned up to full and were looking to charge double the book rate. My last call was to BMW's Only in Marysville, were after saying he won't touch V12's, the owner sort of chuckled and said "Jim, you're about to have one of those 'learning experiences'."

    Which was his way of saying I'd have to do it myself.

    So I did. Successfully. The V12 is not really that complex, but access is a major pain. Probably worse on the 850. I'm spacing on the name of the machine shop I used (it's on Westlake just south of Denny in Seattle), but they were extremely helpful and did good work at reasonable prices.

    If you're not a DIY sort of guy, then you might try Ultimate Motors in Kirkland (Lamborgini dealer). They were recommended to me by Precission in Magnolia (which declined work on the V12). Ultimate quoted me $1950 compared to BMW Northwest's $4500, but then backed out due to concern that the headbolt failure might not be fixable and I'd be one of those "repeat" customers who came back expecting more work for free cause they failed to fix it.

    Wild thought: there's at least one mechanic on the E32 board who I can guarentee can fix your car. At the prices some try and charge for this work, it's conceivable shipping it to him would be worth it as his price is likely to be more reasonable.

    Oh, and why do you need top end work?

  12. #12
    Mattkins99
    Guest
    Location
    , ,
    Member No: Mattkins99's Avatar


    Yes | No

    Car Tender in Seattle seems to work on a lot of

    the V12 cars. They had a 7/8 series tech session covering the engine over the summer. I know I'm a V8 guy, but I tagged along with the Seattle7s group.

  13. #13
    Jim Derrig 93 750
    Guest
    Location
    , ,
    Member No: Jim Derrig 93 750's Avatar


    Yes | No

    could be . . .

    . . . they were never mentioned to me when I was looking in 2000, so I can't say one way or the other. There are a lot of shops that will work on the V12 for less intensive tasks. Unfortunately, the V12 is so rare, and major failures are even more rare, that it's hard to find someone who actually has done and will do internal work at anything approaching a reasonable price. Messin' with the fuel injection or intake manifolds is one thing. But one valve job on a V12 might be the only one they ever do, so the incentive is to charge the owner for the "training" time required to learn the task--it can't be spread out over multiple cars. The owner doesn't "buy" expertise--he pays to train a novice!

    Oh, and the machine shop is Autosport.

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum