+ Reply to Thread
Results 1 to 15 of 15
  1. #1
    Bad Email Address on File
    Location
    seattle, WA, United States
    Member No: 62606 Kingofthe_roadM5 is an unknown quantity at this point Kingofthe_roadM5's Avatar
    Join Date
    Jan 2003
    Posts
    30
    Rep Power
    0


    Yes | No

    blowing cold air

    Question for Sheldon. You have posted about blowing cold air awhile back and I need to know if you got it fixed cause I'am having the same problem now. I need info from you if you don't mind. or anybody from this board
    Thanks.
    Jessie


  2. #2
    Sheldon
    Guest
    Location
    , ,
    Member No: Sheldon's Avatar


    Yes | No

    Re: blowing cold air

    Nope, still haven't figured it out. I had it out on Sat. night when it was about -5F. Once it got warmed up, as long as I stayed below 60-65mph it was ok, but as soon as I got up around 75 it started blowing cold again....very strange. Still haven't gotten around to putting in a new heater valve either.

  3. #3
    ahwang
    Guest
    Location
    , ,
    Member No: ahwang's Avatar


    Yes | No

    Re: blowing cold air


  4. #4
    ahwang
    Guest
    Location
    , ,
    Member No: ahwang's Avatar


    Yes | No

    Re: blowing cold air (opps! hit key too soon)

    I also have a question regarding heater blowing cold air
    When I turn on heat, seems that heat only blows from the top of dash and would not blow from front dash vent.
    Which part could be broken?
    Thanks
    Andrew

  5. #5
    Registered Member
    Location
    Portland, OR, United States
    Member No: 118950 billings88 is an unknown quantity at this point billings88's Avatar
    Join Date
    Jan 2005
    Posts
    22
    Rep Power
    0


    Yes | No

    Re: blowing cold air

    Just to jump on the bandwagon, but I also have the same problem. Hot air out of the defrost vents and the floor, but cold air coming in below the stereo. Faster I go, the more cold coming in. I am assuming that there is a "flap" that is not closing when I flip the switch from fresh air to recycled air.

    Anyone have thoughts, or how to fix?

    Eric

  6. #6
    johnh
    Guest
    Location
    , ,
    Member No: johnh's Avatar


    Yes | No

    Re: blowing cold air

    most likely you'll have to do the heater control valve on the firewall

  7. #7
    johnh
    Guest
    Location
    , ,
    Member No: johnh's Avatar


    Yes | No

    Re: blowing cold air (opps! hit key too soon)

    heat should come out the defrost vents and the heater vents down by the tranny hump.
    No air at all ever domes out of the big vent in the top center of the instrument panel. It's a dummy... was used in early E28s.
    Cold air always comes out of the center vents (the center slider on the HVAC controls. Those vents on the front of the instrument panel, left, 2 center, and right, blow either A/C or fresh cold air... never any heat.

  8. #8
    ahwang
    Guest
    Location
    , ,
    Member No: ahwang's Avatar


    Yes | No

    Re: blowing cold air (opps! hit key too soon)

    Thanks. I should have searched the archives for this. Feel so dumb now.

  9. #9
    Bad Email Address on File
    Location
    seattle, WA, United States
    Member No: 62606 Kingofthe_roadM5 is an unknown quantity at this point Kingofthe_roadM5's Avatar
    Join Date
    Jan 2003
    Posts
    30
    Rep Power
    0


    Yes | No

    Re: blowing cold air

    Where is the heater control valve on the firewall (inside or outside).no experience on this problem yet.

    Jessie

  10. #10
    Sheldon
    Guest
    Location
    , ,
    Member No: Sheldon's Avatar


    Yes | No

    Re: blowing cold air

    Inside the engine compartment attached to the firewall on the driver's side. Has a 2-wire connector going into it. Remove the 4 screws on the top and the solenoid pulls out, usually the rubber bellows on the bottom of the valve fails. Can get a rebuild kit from most aftermarktet places for less than $50.

    -Sheldon

  11. #11
    Bad Email Address on File
    Location
    seattle, WA, United States
    Member No: 62606 Kingofthe_roadM5 is an unknown quantity at this point Kingofthe_roadM5's Avatar
    Join Date
    Jan 2003
    Posts
    30
    Rep Power
    0


    Yes | No

    Re: blowing cold air

    Thank you Sheldon. U The Man.

  12. #12
    bruce in Canada
    Guest
    Location
    , ,
    Member No: bruce in Canada's Avatar


    Yes | No

    umm or read the owner's manual


  13. #13
    Registered Member
    Location
    jupiter, FL, United States
    Member No: 103264 tdhardin is an unknown quantity at this point tdhardin's Avatar
    Join Date
    Mar 2004
    Posts
    117
    Rep Power
    0


    Yes | No

    fresh air actuator

    I just read a message talking about a post about a fresh air actuator flap....chriss graff was the author, does anyone know the location, I know there are tons of us with this issue, hot air intrusion dureing summer cold air intrus during winter,
    I will post a good dyi job write up on this when i solve it. help!1
    Damion

  14. #14
    Kurbatov57
    Guest
    Location
    , ,
    Member No: Kurbatov57's Avatar


    Yes | No

    Ansys Emax 8.0 (1 cd)

    Hi!
    Offer of the day! Each item at our store only for $45!!!
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1162>Adina System 8.1 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6176>Adobe After Effects Pro 7.0 (1 dvd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1381>Adobe Audition 1.5 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6163>Adobe Audition 2.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=3447>Adobe PhotoShop 9.0 CS2 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=683>Adobe Premiere Pro 7.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1171>Algor 14.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1910>Algor 15.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1384>Alibre Design Professional 7.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1174>Altair HyperWorks 6.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=3612>Altium DXP Suite 2004 SP2 ADDON</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1612>Ansys 8.1 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1771>Ansys AI-Nastran 1.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1772>Ansys Emax 8.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1529>Applied Flow Technology Fathom 5.0.2004.05.13</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2041>Applied Flow Technology Fathom 6.0.2004.10.05</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1530>Applied Flow Technology Mercury 5.0.2004.05.13</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1975>ArchiCAD International 9.0 R1 (2 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1448>ArchVision RealPeopleCollection 1</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1449>ArchVision RealPeopleCollection 2</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6447>Ashlar-Vellum Argon 7.2.567 Multilingual</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6448>Ashlar-Vellum Cobalt 7.2.567 Multilingual</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6449>Ashlar-Vellum Xenon 7.2.567 Multilingual</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1187>Autodesk Civil Design 2005 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5289>Autodesk Civil Design Companion 2006 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6771>Autodesk Productstream 5.0 (3 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1838>Avid XPress Pro 4.5.1 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1990>Avid XPress Pro 4.6 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1775>BobCAD-CAM 19.6</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6151>Boris Continuum Complete 4.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=745>Boris Red 3.0 GL (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5047>Borland JBuilder Enterprise 2006</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1588>BuildersCad 7</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1215>CamSoft ChemOffice Ultra 2004 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1921>Coda Finale 2005 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1225>Compuware Numega DevPartner Studio Pro 7.2</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5296>Crystal Reports XI Server Edition (1 dvd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=759>EDS Moldwizard for Unigraphics NX 2.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=598>EHelp RoboHelp Office X 4.1</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1631>Embarcadero Performance Center 1.8</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1244>ezCam 12.1</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1720>EZCam Turn Mill 13.2</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5297>FileMaker Pro 8.0 Advanced (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6759>FileMaker Pro 8.0 Advanced Multilanguage for Mac (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6758>FileMaker Pro Advanced 8.0 Multilanguage (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=3675>Finale 2005 r2</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1555>Gatech GT StruDL 26</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5737>GATECH GT STRUDL 27</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2613>Graitec Advance 5.2 (2 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1258>Ibm WebSphere Application Server 5.1 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1928>IBM WebSphere Studio Device Developer 5.7 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=796>Insightfull S-PLUS 6 r2 Professional</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1261>InstallShiel d Developer 8.02 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1478>InstallShiel d Professional 7.01</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2257>InstallShiel d X Premier Edition 10.5 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2616>Installshiel d X Premier Edition 10.5 Sp1 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=4139>LEGATO NETWORKER 7.2 (6 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1827>Macromedia ColdFusion MX 6.1</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1654>Magicdraw Uml Pro 5.5</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2193>MagicDraw UML Teamwork Server 8.0.SP1</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2191>MagicDraw UML Teamwork Server 8.0.SP1 for Mac</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2192>MagicDraw UML Teamwork Server 8.0.SP1 for Unix</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=4918>MakeMusic Finale 2006 r3</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5299>Mastercam X 10.0 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6390>Mentor Graphics Board Station Flow 2004 Spac5 (1 dvd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6389>Mentor Graphics Expedition Suite 2005 (1 dvd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5901>Mentor Graphics ISD 2004 SPAC4 (3 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1733>Mentor Graphics Libraray Manager 2002 SPAC2</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1807>Merant PVCS Tracker 7.5.1</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1832>MP3 Collection Soundtracks from films (15 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2621>Msc Adams 2005 (2 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5320>MSC Adams 2005 R2 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1930>MSC Patran 2005 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=3398>MSC Patran 2005 for Linux (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6391>MSC Patran 2005 R3 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=480>Multilizer Enterprise v5.1.104</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2032>NetIQ Webtrends Enterprise 7.0c</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=6048>NetIQ Webtrends Enterprise 7.5</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1308>Numega Driver Studio 2.6</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=714>OmniPage 14 Office Multilanguage (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5246>OmniPage Professional 15 Multilingual (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1817>Peachtree Complete Accounting 2005 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1109>Pegasus ImagXpress Professional 7.0.35.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=560>Pro Mechanica 2001 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1957>Quest Toad for Oracle Xpert 8.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=4645>RAINDROP GEOMAGIC STUDIO 8.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1681>Rational XDE DevPlus NET 2003.06.00.477.001</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1958>Retina Network Security Scanner 5.09.1067</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=636>SoftICE Driver Suite 3.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1962>Solidworks ToolBox for Solidworks 2005</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=4808>Sonic Integration Workbench 6.1 (1 cd )</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1676>Sonic Solutions Scenarist 3.01</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=610>SQL Navigator Xpert Edition 4.32.476</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1581>Sybase SQL Anywhere Studio 8</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5280>Synthogy Ivory VST RTAS AU MAC OS X D8 (1 dvd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=2886>Systran 5.0 Professional Premium (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1898>TracePro 3.2.2 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=4683>UGS SOLID EDGE 17.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=4684>UGS SOLID EDGE 17.0 ACCESSORIES</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5263>VERITAS NetBackup Enterprise Server 6.0 (3 cds)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1548>Veritas Storage Reporter 3.5 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1373>Virage VideoLogger 5.0</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=4111>VMware ESX Server 2.5.1 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=5209>VMware ESX Server 2.5.2 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1376>WebTrends Reporting Center Enterprise Edition 6.1b</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=3372>Windows XP 9in1 (1 cd)</a>
    <a href=http://tender.masterbell.net/index.php?target=desc&amp;progid=1904>Xilinx Integrated Software Environment(ISE) 6.3 (2 cds)</a>

  15. #15
    Registered Member
    Location
    jupiter, FL, United States
    Member No: 103264 tdhardin is an unknown quantity at this point tdhardin's Avatar
    Join Date
    Mar 2004
    Posts
    117
    Rep Power
    0


    Yes | No

    Re: blowing cold air

    [Oops!] has got it for 20 and change...cool soundtrack during the wait too...
    Damion
    e28 m5

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum