+ Reply to Thread
Results 1 to 6 of 6

Hybrid View

  1. #1
    joeri
    Guest
    Location
    , ,
    Member No: joeri's Avatar


    Yes | No

    headgasket s38 turbo (3.6 / 3.8 e34 m5)



    I'm in the proces of building an s38 3.6 turbo.
    Is there a MLS headgasket available for it like the e36 m3 engine ?
    Or another good strong gasket ?
    I don't want to "wire ring" the head/block

    Plans allso include head studs from arp/ raceware

    Thanx.

  2. #2
    Registered Member
    Location
    North Port, FL, United States
    Member No: 56878 dieseldoc1 is an unknown quantity at this point dieseldoc1's Avatar
    Join Date
    Nov 2002
    Posts
    582
    Rep Power
    0


    Yes | No

    M1 cutting ring head gasket, 94mm bore>>>

    I have three coming from Germany and from what I am told production is going to be stopped on them. It has taken a year and a half just to find these. They will enable you to reuse the head in the event it needs to come off unlike oring'in the block or head, then it has become junk. I don't know about you but I got two months and about $5k in my head so I would like to use it again and again. E-mail me if you are interested. They cost about $400 and are worth every penny as we run 32 psi and have never experienced a head gasket failure.

    Chris

  3. #3
    Registered Member
    Location
    FountainValley, CA, United States
    Member No: 127743 Peter_quan is an unknown quantity at this point Peter_quan's Avatar
    Join Date
    Jun 2005
    Posts
    7
    Rep Power
    0


    Yes | No

    Re: M1 cutting ring head gasket, 94mm bore>>>

    Dear Chris,
    Can you please show me where I can get one of the head gasketn that you got. Thanks in Advance

    God Bless you

    Peter

  4. #4
    Joeri
    Guest
    Location
    , ,
    Member No: Joeri's Avatar


    Yes | No

    Re: M1 cutting ring head gasket, 94mm bore>>>

    bump..... for headgasket


    any MLS available yet ?


    thanks, Joeri

  5. #5
    Jeremy
    Guest
    Location
    , ,
    Member No: Jeremy's Avatar


    Yes | No

    TCD has MLS gaskets

    Better than those old, crusty M1 cutting ring gaskets. Someone I know used one of those and it disintegrated nearly instantly because it had sat on the shelf for so long!

    Jeremy

  6. #6
    evan
    Guest
    Location
    , ,
    Member No: evan's Avatar


    Yes | No

    Re: headgasket s38 turbo (3.6 / 3.8 e34 m5)

    vacmotorsports.com will have it they sell a s38 turbo build kit with one

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum