+ Reply to Thread
Results 1 to 2 of 2

Hybrid View

  1. #1
    Registered Member
    Location
    , , United States
    Member No: 122458 Basketcase528e is an unknown quantity at this point Basketcase528e's Avatar
    Join Date
    Mar 2005
    Posts
    3
    Rep Power
    0


    Yes | No

    I could use a little help here...troubleshooting

    I puchased a 4/87 528e for an investment about 6 months ago. It was a work in progress with the motor being replaced but not a finished installation. I had the car repainted while still "on the Blocks" and just recently(two weeks ago) finished connecting up all the wiring and cables and nuts and bolts. Turning the key the motor turns over nicely. There is power at the coil. No spark though. Fuel pump does not pump without jumping the newly replaced relays. position sensors check out proper ohms.

    I have heard that Bently makes a good book on diagnosis for this model.
    Any good hearted souls out there that can scan and e-mail me a couple of useful pages on tracking down the source of my cars non starting problem?

    Ps I do not have the diagnostic testor ...I'm doing this with a volt/ohm meter.

    Thanks

    Sean Pinkerton

  2. #2
    Registered Member
    Location
    Cumming, GA, United States
    Member No: 40227 CosmosM3 is an unknown quantity at this point CosmosM3's Avatar
    Join Date
    Jun 2002
    Posts
    26,016
    Rep Power
    0


    Yes | No

    I think you may need to try the 5 series board

    <img src="http://mail.roadfly.com/Session/2437-1zjfhKvkbs2Npua6gr5R/WebFile/TheBeach.jpg">

+ Reply to Thread


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
1e2 Forum